Description
Bolt-in Type Fuel Bulkhead Kit. Terminals and seals ARE included.
This kit allows you to pass through six signal wires into fuel tanks to power single, or dual pumps and a level sender, through our specified bolt-in style fitting. Perfect kit for those who are uncomfortable with, don't have the skills or tools for welding, when welding just isn't possible on the current vessel or setup you currently have, or you determine the welding fabrication cost and effort falls outside of this bolt-in type. It's super easy to assemble!
Keep in mind the bolt pattern is directional so set it up where you want to run the connector to face. The mounting bolts and holes are not equally spaced as they would interfere with the connector bulkhead.
Use our included template to drill out the correct size hole and mounting bolt holes. The backing plates pass into the vessel through this hole for the bolts to thread into (don't drop them!). A large diameter custom o-ring formulated for use with gasoline, ethanol, and blends seals the tophat to the outside of the tank, encompassing the bolt holes. Nylon washers seal the bolts at the top. The rest of the kit is exactly like the weld-in kit with the bulkhead passthrough and o-ring for petrol/ethanol, connectors and terminals. Super lube included to make sure the o-rings seat easily in their machined grooves
Kit contents:
• 1 x Machined Aluminum fuel bulkhead (MOTR-03956)
• 2 x Machined Bottom Threaded Plates (MOTR-03955)
• 6 x M5x30 Flanged Hex Head Bolts (HDWR-16556)
• 6 x Nylon Plastic Sealing Washers (HDWR-29342)
• 1 x Flex fuel, Gasoline, and Methanol use O-Ring for Passthrough to Bulkhead (MOTR-100537)
• 1 x Flex fuel, Gasoline, and Methanol use O-Ring for Bulkhead to Tank (MOTR-100538)
• 1 x Internal Retaining Ring C-Clip (HDWR-21578)
• 1 x 6 Way Fuel Tank Bulkhead Passthrough Connector Receptacle (CONN-100957)
• 1 x 6 Way Fuel Pump Connector Plug for Bulkhead Connection (CONN-100958)
• 1 x 6 Way Fuel Pump Connector Plug for Bulkhead Connection w/o Internal Seal & Clip (CONN-101221)
• 14 x Female Terminal for 3-way Headlight Plug Connector (CONN-100463)
• 4 x GM Delphi / Packard Metripack 150.2 Seal Plug for Hand Insertion (CONN-56158)
• 1 x SuperLube Synthetic Grease Packet (MOTR-03970)
• 1 x Printed Drill Template