Description

THIS PRODUCT IS DISCONTINUED, PLEASE SEE
MOTR-05066 - Atomizer 3 Billet Racing Injectors
FOR UPDATED PRODUCTS


Extreme Flow for your high horsepower applications!

All injectors are default extended tip. Only the 100-235 lb/hr are able to select standard tip option.

These injectors flow 100 lbs/hr at 43.5 PSI ( 3 BAR )! These units are low-impedance and require peak and hold injector drivers or additional resistors for saturation drivers. Despite the high flow rate, they are linear and controllable at low pulse widths compared to other extreme flow injectors!



Features:

• Race Specific Extreme Flow Design
• Excellent response characteristics
• Robust Proprietary, TiN coated Design
• Low Impedance
• Fits in most many applications

• Coil Resistance: 1.6 Ohms / Low Impedance / Low-Z (ECM peak & hold driver or modifications required)
• Static Flow Rate @ 43.5PSI ( 300kPa ) w/Gas: 100lb/hr = 1050cc/min
• Turn on time: 1.5ms
• Connector: Bosch EV1
• Series: Atomizer 2
• Orifice Type: Atomizer Disc
• Spray Pattern: Large Fog w/45 degree Vapor Cone Pattern

• Lifetime Conditional Warranty
• Click here for Instructions, Warranty & Disclaimer
• CRITICAL NOTE! These injectors have no filter basket and must be used with a fine 10 micron Filter!!!
  It is mandatory to use a MRE 10 Micron Stainless Steel Methanol Safe Filter - MOTR-05054 - click here

Associated & Mating Parts

Specifications

Specifications:

• Coil Resistance: 1.6 Ohms / Low Impedance / Low-Z (ECM peak & hold driver or modifications required)
• Static Flow Rate @ 43.5PSI ( 300kPa ) w/Gas: 100 lb/hr = 1050 cc/min
• Turn on time: 1.5ms
• Connector: Bosch EV1
• Series: Atomizer Disc
• Orifice Type: Atomizer Disc
• Spray Pattern: Large Fog w/45 degree Vapor Cone Pattern

Applications