Description

May 2024 - The base model (non-cellular) will be delayed for several months. Next generation of data, telemetry, and control – now with 4G LTE telemetry option!-


Your time on track matters and you want to maximize every minute and dollar toward tuning the engine, honing your racecraft, or finding that extra edge over your competition. As motorsports evolves, so should motorsports telemetry technology: more real-time, extending your reach to the people who matter. Showing you what you need while you’re still at the track, so you can make changes and adapt now, not later. Autosport Labs’ new RaceCapture/Pro MK3 brings flexible data acquisition, predictive lap timing, real-time telemetry, and control to your race car.

Live-stream your racing to Podium, where you can perform real-time analysis on engine, chassis and driver performance. Share and compare your laps with friends, colleagues, and race coaches around the world.

The optional on-board, high performance, worldwide-capable 4G LTE cellular telemetry provides real-time streaming of telemetry data to the Podium cloud platform. You can monitor engine sensor data, chassis data or perform real-time driver coaching on a lap-by-lap basis – to the pits or anywhere in the world.

Included in the package:

• RaceCapture/Pro MK4 system
• Power + CAN1 data pigtail
• External magnetic mount GNSS antenna
• Roof mount cellular antenna (if optioned cellular telemetry)
• USB cable
• Quick start guide

Specifications

Sensors
Analog Inputs
Channels	9 (8 external + 1 internal battery/supply voltage)
Voltage range	0-5v
Input impedance	Greater than 1M ohm
Voltage Protection	400v (intermittent)
ADC precision	12 bit
Maximum sample rate	1000Hz
Mapping	Raw / linear formula / interpolated map
Digital I/O
Channels	4
Output mode type	Open Drain
Output current capacity	1A, inductively clamped
Input mode voltage range	0-12v
Input voltage protection	0-40v
Maximum sample rate	1000Hz
Timer inputs (RPM / Frequency)
Channels	4
Voltage Protection	400v (intermittent)
Maximum sample rate	1000Hz
Mapping	RPM, Frequency
Voltage Reference
Output Voltage / Capacity	5v / 500mA
CAN Bus
CAN Channels	2
CAN baud rate	125K, 250K, 500K, 1M Baud
CAN filters	14 per channel
Protocol Support	OBDII PID, custom CAN mapping
CAN Bus	CAN 2.0 compatible, 1M baud
CAN termination	Software controlled
Cellular Telemetry (Optional)
Cellular	4G LTE (North America and worldwide)
Maximum Sample Rate	10Hz
Wireless
WiFi	802.11bgn
WiFi Modes	Access Point, Infrastructure
Bluetooth	Bluetooth 2.0 EDR
Maximum Sample Rate	50Hz (Bluetooth and WiFi)
GPS
GPS Type	External active antenna
Sample Rates supported	1 / 5 / 10 / 25Hz
GPS accuracy	2.5M CEP
Inertial Motion Unit
Accelerometer Channels	3 (X/Y/Z) (2G, 4G capable)
Gyro Channels	3 (Yaw/Pitch/Roll) (1000 degrees/sec)
Storage
Micro SD	Up to 32GB (SDHC)
CAN bus direct mapping	100 direct CAN mapping channels
Capabilities
Channel Support	200
Predictive Lap Timing	Built-in
Track Mapping	Circuit and point-point
Track maps	200 built in for autonomous auto-detection; unlimited via RaceCapture app with interactive track map builder
Sectors per track	20
Analysis	Included in the RaceCapture App
Export data format	Plain CSV
Physical
Dimensions	150 x 85 x 30mm (5.9 x 3.35 x 1.18in)
Temperature range	-40 to 85c
Environmental	Connectors: IP67 / enclosure IP51
Weight	255g (12 oz)
Physical	M12 12P Female for Analog sensors M12 12P Female for Digital sensors M8 6P for CAN1/CAN2 data connection M8 4P for Power/CAN1 connection SMA for external GPS antenna RP-SMA for cellular antenna
Power Consumption (max)	Main System: 0.6W With Wireless: 1.6W With Cellular Telemetry: 8.6W With Cellular Telemetry and Wireless active: 9.6W

Mating Parts

Applications